Terminals & Directions — Airport Drive
Reach the right terminal car park
Park close to your terminal, booked before you leave home. Most parking stress at Tullamarine comes from entering the wrong cluster — follow your terminal letter first, then the car park name on your booking.
T1 · T2 · T3 via T123 — T4 via its own side. Open 24 hours.
Follow your terminal letter first
Three letters decide your lane. Pick the row that matches your ticket, then stay in it down Airport Drive.
Terminal row
T1 · T2 · T3 — T123
Qantas domestic, international and Virgin Australia. Use T123 Terminal Car Park signs. Premium and valet sit in this close-in cluster for airport parking near Terminal 3.
Stay in terminal lanesTerminal row
T4 — own side
Jetstar, Rex and Link Airways. Watch for dedicated T4 parking signs after Airport Drive. Do not follow T123 even if those structures look closer.
T4 ramp onlyTerminal row
Value North / South
Open-air parking melbourne airport bays with free shuttle every 15 minutes, day and night. Follow the North or South name exactly as written on your booking.
Shuttle 4–25 minClose-in cluster
T1, T2 and T3 use the T123 cluster
Terminal 3 is the Virgin Australia domestic terminal at Melbourne Airport. The T123 Terminal Car Park serves T3 directly, and Premium and valet options are positioned for T3 travellers. The airport treats T3 as part of the main close-in parking cluster, so T1, T2 and T3 drivers aim for the same structures.
If your ticket says T1 Qantas domestic, T2 international, or T3 Virgin, follow T123 Terminal signs and stay in terminal lanes. For melburne airport parking first-timers, this is the bay that keeps the walk to check-in to minutes via lifts and walkways.
Bay note
Note your level, row and lift lobby before you walk away.
Walk time
Minutes via walkway
Own side
T4 has its own parking side
T4 serves Jetstar, Rex and Link Airways traffic with its own Premium Car Park positioning. Do not follow T123 if you fly T4, even if the main structures look closer on approach. Watch for dedicated T4 parking signs after Airport Drive.
Parking on the correct side keeps your walk short and your exit simple. Groups splitting across terminals should agree on a meeting point landside before parking — cars stay with their departure terminal.
- After Airport Drive, filter right for the T4 ramp, not the T123 decks.
- Splitting terminals? Park with your own departure, meet landside.
Airport Drive measure
Airport Drive and signage basics
Airport Drive is one of the official approach roads for Melbourne Airport parking. Signs point drivers to terminal car parks via this route for both terminal parking and some value access. Choose your lane early — last-second changes near terminal entries cause missed turns.
Step one
Hold Airport Drive
Stay on Airport Drive until terminal piers appear ahead. Keep terminal signs in view and ignore city-exit prompts once you are inside airport roads.
Step two
Pick T123 or T4
T1, T2 and T3 go T123. T4 goes its own way. Value North or South follows its booked name. If you miss it, loop around — never stop or reverse.
Step three
Have the QR ready
If you prebooked inside the correct window and saved the QR code, entry takes seconds. Hold it up before the barrier so the reader catches it first pass.
Open-air rows
Value North and South entries
Value car parks sit outside the terminal structures and rely on shuttle buses. Follow Value North or Value South signs as named on your booking. Both are open-air and use the free shuttle every 15 minutes, day and night, with 4 to 25 minutes travel time.
Note your row and nearest shuttle stop before leaving the car. Keep headlights on in poor light — open-air rows can be dim before dawn.
Timing rule
Walking versus shuttle timing
A short walk from T123 or T4 structures takes minutes via lifts and walkways. A value stay adds shuttle wait plus a 4 to 25 minute ride. Add bag-drop and security queues on top.
Leave the car at least 90 minutes before departure on domestic value stays — longer at peaks. International needs more.
Prebooked QR ready before the barrier keeps entry to seconds.
Missed entry: follow recirculation signs forward. Wrong cluster: exit and re-enter via correct T123 or T4 signs. Gate scan fails: press help with booking details ready.
Shuttle confusion — what to check?
Confirm North or South on the windshield and ask the driver for the T123 or T4 drop. Keep melbournaairportparking.com contact details handy if you need to ask a parking question before you enter.
Ask before you enter
Ask for direction help
Tell us your terminal, flight time and booked car park. We will point you to the right Airport Drive lane — 2 Grants Road, Tullamarine VIC 3043, open 24 hours, 7 days. Phone +61 3 9300 7095, email [email protected].